SmartGage
Key Features
- IOT Ready LVDT Gauging Display
- On-Screen On-Line SPC DRO
- Auto Offset Compensation
- PDF Reports On Screen
| Input Channels | Max 8 LVDT |
| Applications | Standard |
| Dimension Type | Linear |
| Resolution | 0.1µm/ 1µm |
| Units | mm |
| Measurement Modes | Current, Min, Max, TIR, AVG |
| Additional results | Max, Min, Ovality, and Taper for respective result can be display in run mode as additional results. |
| Result Formula Editor | Result formula can be edited for combinations of Piezo channels and / or other results. |
| Indications | Pass, Fail, Warning with facility to select require display reading in require colour according to the tolerance band |
| Grade | Max 25 Grades available |
| Other Features | Machine Stop Massage and Machine stop signal available for reject job condition |
|
Calibration |
Single/Double Master configurable |
| Force Mastering after N number of measured jobs. | |
| Group Calibration for selected result in one group. | |
| Auto Mastering is available. Accept Higher and Lower master on inserting into fixture/plug automatically in calibration process | |
|
Measurement process |
Auto Cycle (After inserting job in Fixture/Plug it will show related Fixture/Plug result) |
| Measurement Cycle (Sequential measurement) | |
|
Charts |
XBar- R Chart/ XBar- S Chart |
| Histogram | |
| Runchart | |
| SPC values | Cp, Cpk, Pp, Ppk |
| Counters | Over Size |
| Under Size | |
| OK | |
| Not Good | |
| Total measure | |
| Total produces (After receiving Cycle complete signal from Machine) | |
| Setup | 100nos can be created. |
| Number Of Results | 64 |
| User Interface | 7” touchscreen Colour LCD display (PIXEL: 800 x 480 – RGB) |
|
Ports |
1. RS-232 for PC communication |
| 2.RS-232 for machine interface (compatible Fanuc o-i Power mate/16/18 series) | |
| USB | USB2.0 Compliant (For Mass Storage Device). |
| Ethernet | Ethernet for sending reports to server using Client server utility |
| Digital Outputs | 7 outputs, Isolated, Open collector |
| Digital Inputs | 8 Inputs, Isolated |
| Display Views | Digital Readout/ Dial / Run Chart |
| Memory | In built micro SD card of 16GB for data storage |
| Footswitch interface | Available |
| Login | Operator and Supervisor login (Limited menu access to operator) |
| Report Storage | Shift wise data storage |
| Report Format | PDF, CSV, and DFQ (to view in Q-DAS application). |
| In SmartGage we can only view PDF format file. | |
| All report is available in Year ->Month->Date->and Setup wise format. |