PneuGage
Key Features
- IOT Ready Pneumatic Gauging Display
- On-Screen On-Line SPC DRO
- Auto Air Cut-Off
- Auto Offset Compensation
- PDF Reports On Screen
| Detailed Features | |
|---|---|
| Applications | Standard/Honing |
| Dimension Type | Linear |
| Resolution | 0.1μm/ 1μm |
| Units | mm |
| Measurement Modes | Current, Min, Max, TIR, AVG |
| Additional results | Max, Min, Ovality, and Taper for respective result can be display in run mode as additional results. |
| Result Formula Editor | Result formula can be edited for combinations of Piezo channels and / or other results. |
| Indications | Pass, Fail, Warning with facility to select require display reading in require colour according to the tolerance band |
| Grade | Max 25 Grades available |
| Other Features | Machine Stop Message and Machine stop signal available for reject job condition |
|
Calibration |
Single/Double Master configurable / Force Mastering after N number of measured jobs / Group Calibration for selected result in one group / Auto Mastering
is available. Accept Higher and Lower master on inserting into fixture/plug automatically in calibration process |
|
Auto Air Cut-Off |
Yes (Air will become ON after inserting job in Fixture/Plug) Air Saving facility / When nothing is inserted in Fixture/Plug Air will be OFF |
| Measurement process | Auto Cycle (After inserting job in Fixture/Plug it will show related Fixture/Plug result) / Measurement Cycle (Sequential measurement) |
| Charts | XBar- R Chart/ XBar- S Chart / Histogram / Runchart |
| Online SPC | Cp, Cpk, Pp, Ppk, Sigma |
| Counters | Over Size / Under Size / OK / Not Good / Total measure / Total produces (After receiving Cycle complete signal from Machine) |
| Setup | 100 nos can be created. |
| Number Of Results | 64 |
| Display | 7” touchscreen Colour LCD display |
| Ports | RS-232 for PC communication / RS-232 for machine interface (compatible Fanuc o-i Power mate/16/18 series) |
| USB | USB2.0 Compliant (For Mass Storage Device) |
| Ethernet | Ethernet for sending reports to server using Client server utility |
| Digital Outputs | 7 outputs, Isolated, Open collector |
| Digital Inputs | 8 Inputs, Isolated |
| Display Views | Digital Readout/ Dial / Bargraph / Run Chart |
| Memory | In built micro SD card of 16GB for data storage (Contact manufacturer for additional storage capacity) |
| Foot Switch Interface | Available |
| Login | Operator and Supervisor login (Limited menu access to operator) |
| Report Storage | Shift wise data storage |
| Report Transmission | LAN/ WI-FI (Need to purchase WI-FI Dongle)/ USB
Real time data transfer for dashboards through web API and .csv available. |
|
Report Format |
PDF, CSV, and DFQ (to view in Q-DAS application) / In PneuGage we can only view PDF format file / All report is available in Year ->Month->Date->and Setup wise format |