4V1002
Key Features
- Number of Channels: 2-LVDT or 1-PIEZO
- 4″ touch Colour display with dial, dro and run chat
- Cp, Cpk, (Can be seen on Display of ongoing Measurements as per Subgroup size 10 by default)
- 16 GB Inbuilt data storage
- Data storage facility
| Feature | Description |
|---|---|
| Number of Channels | 2-LVDT or 1-PIEZO |
| Number of results | 2 (Max) |
| Number of Setups | 10 (Max) |
| Number of Layouts | 2 (Max) |
| Inbuilt data storage | 16 GB |
| Hardware Keys | 6 Navigation Keys |
| Result Views | Dial, DRO, Run-Chart |
| Measurement Modes | Current, Minimum, Maximum, Average, Difference |
| Dimension Types | Linear |
| Linear units | MM, Micron, INCH |
| Linear Resolution | 0.1, 0.2, 0.5, 1, 2, 5, 10 Micron |
| Users | Quality Admin and Operator Login can be created. Max. 10 users limit. (Minimum access to Operator Login) |
| Digital Outputs | 3 Digital Outputs Available (OK, Reject, Rework). Open Collector Outputs |
| Digital Inputs | NA |
| Foot-Switch | 1 Foot-Switch Connection Available |
| Communication Ports | 1xRS232 (COM1), 1xEthernet, 1xUSB |
| Formula Editor | Result formula can be edited for combinations of Channels and or other results |
| Preset And Mastering | Step, Simultaneous (Group) |
| Tolerance Entry | Nominal, Lower Set Limit (LSL), Lower Control Limit (LCL), Upper Control Limit (UCL), Upper Set Limit (USL) |
| SPC | Cp, Cpk, (Can be seen on Display of ongoing Measurements as per Subgroup size 10 by default) |
| Run-Chart | Run-Chart of ongoing Measurement cab be seen on Screen |
| Job Counters | Total Jobs, OK Jobs, NG Jobs. Separate screen for result wise job counters display |
|
Measurement Delays |
Start-up Delay (0.1 to 9.9 Sec Stabilizing Time),
Dynamic Timer Delay (0.1 to 999.9 Sec Time for Actual Measurement after which Data will be Saved) |
| Measurement Cycle | Auto Cycle (Auto Time Base) and Measurement Cycle (Trigger Based) |
| Additional Displays | 4 additional displays for both results (Configurable to MAX, MIN, AVG, DIFF, Cp, Cpk) |
| Shortcuts on Main Screen | Shortcuts for Setup, Clock Settings and Results. Need to long press for 2 seconds (only for Quality Login) |
| Serial Output String | Standard |
| CSV Files | For every measurement unit will send csv file to server (SmartServer Utility) and also update day-wise csv file of every Setup. |
| CSV files sharing to USB Drive | Generated csv files can be copied to USB Drive (Pen Drive) manually |
| Setup Files Restore/Backup | All Setup Files in Unit Can be Shared to USB Drive (Pen Drive) as backup, or Setups from other Similar Unit can be Loaded/Restored to this Unit |
| Auto data transfer | After Completion of Measurement (Each Time) Measured Data will be Transferred to Serial Port without any External Trigger |
|
Auto Air Cut-Off |
Optional on Extra Charge (Contact Supplier) (Air will be in full consumption while measurement while out of Measurement consumption will be cut by approx. 80 to 90%) |
| Low Pressure Indication | Optional on Extra Charge (Contact Supplier/Manufacturer) |
| Wi-Fi, Bluetooth | Optional on Extra Charge (Contact Supplier/Manufacturer) |
| GSM for SMS facility | Optional on Extra Charge (Contact Supplier/Manufacturer) |
| Fanuc Communication | Optional on Extra Charge (Contact Supplier/Manufacturer) for Auto-Offset Function through Serial Communication (RS232) |
| RS-485 | Optional on Extra Charge (Contact Supplier/Manufacturer) for Auto-Offset Function through BCD Communication (Digital IO’s) |