Versa Controls

Charge Monitor

Click image to zoom

Specifications:

Input

3 x KLARI-ONE-PLUS modules using 1 I/U-Combi-PROBE each, 1mOhm, 1000 V
parallel measurement of current and voltage

Resolution

• 5 measurement ranges and autorange function selectable • ± 15 bit/range

Gain	I-PROBE		U-PROBE
	1 mΩ		1000 V
	range [A]	resolution [mA/bit]	range [V DC]	resolution [mV/bit]
100	+/- 7,5	0,25	0...+/- 37,5	1,25
50	+/- 15	0,5	0...+/- 75	2,5
24	+/- 30	1	0...+/- 150	5
6	+/- 120	4	0...+/- 600	20
1	- 300/+ 720	24	0...+/- 1000	120

Accuracy

± 1% of measurement value ± 3 bit of range
valid for temperature range of - 40 .. + 85°C

Sample rate

internal up to 16 kHz,

Features

selectable data output (CAN2.0B and/or USB-2.0 interface)
data output via CAN 1 and CAN 2 configurable (baudrate, identifier etc.)
internal CAN-termination, switchable via software
automatic PROBE-identification with calibration value processing

Output

2 x CAN 2.0 A/B, (High-Speed CAN, ISO 11898) from 125 kbit/s up to max. 1 Mbit/s, per CAN with up to 8.000 frames/s
USB-2.0 interface

Timestamp

6.4 µs resolution (is included in CAN frame)

Housing

- Protection

- Weight

- Dimension

plastic-housing,

IP54

20 kg

480/300/480 mm (L/W/H)

Supply

230 V, 50 Hz

Current consumption

ca. 2 A

Configuration

via PC using CAN or USB-2.0 interface. Configurations could be created, archived and loaded into the module.

speed CAN: 125 kB…1 MB
measurement type, measuring speed, channels

Modes

DC-measurement
AC-measurement, 1- or 3-phase
RMS calculation for AC signals
Selectable sample speed for the channels

Temperature range

-20…+ 50°C

Isolation

1000 V

Product Information:

Variants

AC Measurement options:

Schuko- CEE 32 or 125 A
Type 1 (North America)
Type 2 (Europe)
GB/T (China)

DC Measurement options:

CCS Type 1 / Combo 1 (North America)
CCS Type 2 / Combo 2 (Europe)
GB/T (China)
CHAdeMO (Japan)

Capabilities

Measuring unit for measuring currents and voltages of AC- or DC-signals.
The measuring unit is installed between charge station and vehicle.
Measuring speed is configurable individually. Current and voltage can be measured simultaneously up to 16 kHz.
Output of measuring values on a 7-inch-display and/or via CAN-interfaces.
Following measuring modes are available:
- DC-measurement: I_instantaneous, U_ instantaneous, I_charge, I_discharge, I_total,
- AC-measurement: I_ instantaneous, U_ instantaneous.
The measured values may be used for calculating the following values:
- U_eff
- I_eff
- cos f and P_active power
- electric work

These values can be pictured on the display, saved on a USB drive or transmitted via CAN-interfaces.

Features

plastic-housing, 480/300/480 mm (l/w/h)
protection class IP54,
temperature range -20...+50°C
supply 230 V AC, current consumption approx. 2 A
detailed technical description is contained in our user manual

Delivery

Measuring unit
PC software for configuration via CAN or USB-2.0 interface
CAN database and documentation on CD ROM
USB 2.0 connection cable

Using KlariViewer-software logged data can be displayed and processed further.

Accessories

USB 2.0 connection cable

Download - Data Sheet